Home > Products > Stainless Steel Wire

Stainless Steel Wire in coils or spools

Stainless Steel Wire are popularly used in the Engineering, Chemical, Construction and various other industries besides having applications in manufacturing of Kitchen Wares, Utensils and Ornaments. Stainless Steel Wire, at Our factory are manufactured to comply with international standards as well as in accordance with customer's specifications.

Size Range: 0.10 mm to 8.00 mm
Grades: AISI 200, 300 & 400 series or equivalent other international grades
Finish: Soft annealed - ¼ hard, ½ hard, ¾ hard, full hard (Matte or Bright finish

Stainless steel cold heading wire specifications:
Diameter: 3,00 - 8,00 mm.
Grade: 304.
Application: Cold Heading Quality.
Special Characteristics : Suitable material for Screws, Nuts, Bolts.
Conditions : Cold Drawn, Annealed, Clean Surface.

Stainless Steel Wire new size:
Wire Diameter: 1.6mm
Roll:1 roll of 50 feet length
Packing: plastic inside and weaving cloth outside 200ft/roll
Wire Diameter: 1mm
Roll:1 roll of 2 KG
Packing: plastic inside and weaving cloth outside 2kg/roll

SS grade: AISI 430, AISI 201, AISI 430A, AISI 410
Diameter: 0.13mm
Finish: Bright and shiny with no grease on the surface
Temper: Annealed
Packing: 4 kg spools, spool wrapped with shrink film then 4 spools packed in carton box, carton boxes in wooden case.
Tensile Strength: 70 ~ 80 kg/mm2
Elongation: 25%
Application: Spiral scrubber manufacturing

Stainless Steel Wire Mesh 304, 316
Wire Diameter:0.6mm, 0.78mm
Mesh Size:10× 10In
Sheet Size:10× 3ft
Packing: plastic inside and weaving cloth outside

Our hot products:

  • Stainless Steel Wires(Matt Finish),Grade(AISI 302) & Hardness(Spring hard,Soap coated).
  • Non magnetic stainless steel wire half hard or full hard(140 To 180 UTS) for manufacture of stainless steel pins.
  • 1.2 mm & 1.3 mm stainless steel single wire and twisted wire type AISI Grade 304-L.
  • 0.15mm soap coated stainless steel wire.
  • Stainless steel wire with diameter 1.0 mm and 1.2mm for produce cables.
  • Stainless steel wire 410 / 0.13mm / 15kg/spool to be used in making cleaning scourer.
  • Stainless steel wire bright hard drawn material no. 1.4310 size: 0.8+ - 0.03 mm dia din specification 17224 × 12 cr ni 177k.
  • Stainless steel wire grade 410, thickness 0.13 mm, used in stainless steel scrubber.
  • Stainless Steel Grade 304 and 316 round bar, diameter 2 inch - 6 inch.
  • Stainless steel wire loop ties, 1.2 mm wire thickness in 316 grade stainless steel, in particular 110 mm long and 30 mm long.
  • Stainless Steel Spring Wire in Grade # 302 and diameters from 2 mm to 6 mm.

Dimensional Tolerance of Stainless Steel Wire

Diameter Tolerance
Under(mm) Up to and including(mm)
0.20 0.19 0.005
0.30 0.20 0.008
0.80 0.30 0.010
1.50 0.80 0.013
2.00 1.50 0.015
4.00 2.00 0.025
20.00 4.00 0.030

Stainless Steel Wire spoolsStainless Steel Wire of different size spools

Stainless Steel Wire in coils and spoolsStainless Steel Wire - spring wire