Call Us +86-318-53877776
Home > Products > Low Carbon Steel Wire

Low Carbon Steel Wire

General-purpose low-carbon steel wire.
Heat treated without coating.
Chemical composition (%): С = 0.06-0.12, Si ≤ 0.05, Mn = 0.25-0.5, S ≤ 0.05, P ≤ 0.04.
Breaking strength 290-490 kgf.

Diameter, mm Breaking strength, kgf: Relative elongation, %, not less
3 -0,12 20
4 -0,16
5 -0,16
6 -0,16
1,2 -0,06 15
1 -0,05
0,9 -0,05
0,8 -0,05

General-purpose low-carbon steel wire. Not heat treated. Galvanized.
Chemical composition(%): С = 0.06-0.12, Si ≤ 0.05, Mn = 0.25-0.5, S ≤ 0.05, P ≤ 0.04.
Breaking strength, kgf: 560-900.

Diameter, mm Breaking strength, kgf: Relative elongation, %, not less  
3 -0,12 20 40-60
4 -0,16
5 -0,16

General-purpose low-carbon steel wire. Not heat treated.
Chemical composition(%): C = 0.06-0.12, Si ≤ 0.05, Mn = 0.25-0.5, S ≤ 0.05, P ≤ 0.04.
Deviation from nominal diameter:

Diameter, mm Deviation, mm
3 +0 -0,12
4 +0 -0,16
5 +0 -0,16

Dimensions:

Nominal Diameter, mm Breaking strength, kgf: Relative elongation, %, not less
First group Second group 20
3,0 540-1080 640-930
4,0 440-930 590-880
5,0 390-830 490-780

Low carbon hot dipped steel wire. Heat-treated. Galvanized.
Zinc coating: ≥ 40 gr/m2.
Carbon content: 0.06-0.1%.
Tensile strength: 340-520 N/mm2.
Common packing 20-70 kgs/coil.
Steel boiling.
The absence of a wire rust, oxides, grease, after drawing.
Coil with two ends (one-piece wire).
Welding points should be treated (welding joint, processed core welding).
0.7 mm +/- 0.05 mm, 0.8 mm +/- 0.05 mm.

Inquiry for Our Product

Anping Stainless Steel Wire Factory
E-mail: sales@sswiresupplier.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Contact Us

Contact us immediately if you are interested in our stainless steel wire products. We are waiting for you here all the time.